TPSG95 – SailGauge (DF95)

$19.99

3 in stock

TPSG95 – SailGauge (DF95)

This amazing little device is your ticket to setting up your DF65 so you can compete with the big boys!! Very handy “all-in-one” tool. Comes complete with detailed instructions!

Instructions: (Pictures are included on the instructions you receive with the item)

When you first hold this amazing little device, you will be immediately impressed with the design functionality.
There are two edges to your new SailGauge©
1. The first edge has radial cuts labelled 15 through 30, then ‘V’ notches labelled 40 through 80.
2. The second edge is labelled 30 through 80.
Both these edges represent accurate gauged settings for your Sail and Rig set ups.
These numbers are millimeter settings because setting your sails/rig is all down to millimeter accuracy.
Now we will elaborate on the use of each of the edge settings on your new SailGauge©.
Set the sail and boom distances to accommodate the wind you are going to sail in.
1. First edge labelled 15-35 is the setting for the “Camber” of your Jib & Mainsail.
Place the SailGauge95© on your Jib or Mainsail Boom, immediately behind the Jib connector, or immediately behind the
Mainsail Boom moulding and select the setting you require.
2. First edge labelled 40-80 is the setting for the “Twist” of your Jib or Mainsail.
Place the SailGauge95© on the Jib up-haul cord adjacent to the second Jib Batten, or halfway up the leech of the Jib and
adjacent to the second Mainsail batten and select the setting you require. I mark this position on the Jib up-haul cord
3. Second edge labelled 30-80 is the setting for the Jib Boom distance to the base of the Mast.
Place the SailGauge95© on the Mast and select the setting you require

and Backstay with a marker.